The Most Commonly Asked Questions About Your MagnoFuel®
After the mounting of the MagnoFuel®, I noticed a slightly increased fuel consumption. How can you explain this?
A. This clearly shows that
the MagnoFuel does its job. By burning off the coal deposits in the
combustion room and the path to the combustion room, as well as on the
cylinders and rings,the volume will be increase almost to the original
volume of the engine. This means that through a bigger section there
will flow an increased quantity of fuel.
Why must I build in a set of two pieces of the MagnoFuel® in my engine ?
A. Due to the fact that there is a distance of around 10 cm between the two parts of which a set consists, the first unit will make a pre-treatment of the fuel, the final treatment in order to obtain the best possible dispersion, is made by the second unit.
This will ensure a better mix between the fuel and air particles, which leads to a much better combustion.
Will my MagnoFuel® affect the factory warranty on my vehicle?
A. NO! Since the MagnoFuel® is designed in a clamp-on configuration, there are no changes necessary to the fuel lines.
How long will my MagnoFuel last?
A. FOREVER! Your MagnoFuel® is made with permanent
magnets, which never lose their power.
Is there anything I need to do after installing my MagnoFuel®
A. Generally NO! However, your MagnoFuel® was not designed as a "Band-Aid". If your vehicle is due for / or in need of a tune-up and / or an oil change, this should be done prior to installing your MagnoFuel® Also, make sure your air filter is clean or new.
Will my MagnoFuel® cause any problems with the computer in my vehicle?
A. NO! The computer is usually located inside the vehicle, and with the proper installation of the MagnoFuel® individual components, there is plenty of distance between your MagnoFuel® and the computer.Also, the type of computer in your vehicle can not be adversely affected by the presence of a magnet.